|
 **Limited offer** - Fixturlaser's latest Laser Shaft Alignment System is available at the price of £4,900.00, including:
- afree 1/2 day Training Session
- afree Year 1 System Calibration
Only when purchased directly from Monition Ltd - the official UK Main Distributor for Fixturlaser.
Contact us for further details on:
01909 722000
or by email at sales@monition.com quoting "Calibration 2009 Offer".
Fixturlaser GO Product Brochure (PDF, 1.06 Mbs)
Why complicate things? Using laser shaft alignment systems will make your everyday life so much easier, compared to using the traditional methods, such as dials, straight edges, etc. Fixturlaser GO is the latest addition to the Express Alignment product range, with the typical characteristics of a laser alignment system from Fixturlaser. It is an uncomplicated laser alignment tool for every maintenance professional who is concerned about the machine's length of life.
Measuring and Aligning with Fixturlaser GO
MEASURE
When the fixtures are mounted and all distance values have been entered, you are ready to start taking measurement points. The system needs three measurement points with a minimum angle of 45° between readings. The rotation guide indicates with black or white fields when you are in a permitted area or not.
RESULTS
The measurement result screen shows coupling values and foot values for horizontal and vertical direction. The result field is enhanced with symbols indicating angular and/ or offset errors.
ALIGN
Proceeding to alignment, you start out with rotating the shafts to the 12 or 6 o’clock position in order to make adjustments in the vertical direction. To reach the right position, you have the angle guide to your help. When shimming the machine, the live values will indicate when the machine is within tolerance. Also, the arrows by the machine’s feet will show in which direction the machine needs to be moved.
Continue by rotating the shafts to the 3 or 9 o’clock position for adjustments in the horizontal direction. Once again, the angle guide will help you with reaching the right position. Move the machine until the values for both angular and parallel alignment are within tolerance, where the arrows again help out with which direction to choose.Complete the laser alignment process by rotating the shafts back to the 12 or 6 o’clock position to verify that the machine’s alignment status is within tolerance. To confirm the result, redo the measurement.
Fixturlaser GO Features
 Several of its features are adopted from the innovative Fixturlaser XA system, which will reduce the time spent on pre-alignment actions, measurement registration, performing the actual alignment, remeasuring to make certain that you have a correctly aligned machine; and, finally, documenting the measurement data.
 The pre-mounted fixtures speed up mounting and packing of the fixtures.
The CCD technology used in the measurement units’ extra large detector area (30 mm) minimizes or, in most cases, eliminates the need for rough alignment. This technology also makes it possible to suppress ambient light and it rejects side spots that might interfere with the
accuracy of the measurement values.
Line laser combined with the CCD, renders the laser adjustment easier than ever. The measurement units will always be in the right position sideways, and vertical adjustments are easily done by unsnapping the measurement units’ snap-on fixtures.
 The three LED lights on the display unit indicate whether the couplings are within tolerance (green light), within double tolerance (orange light), or out of double tolerance (red)
Other characteristics facilitating the handling of the system are the icon based user interface, a typical Fixturlaser trademark, now used in our systems for more than 15 years.
The measurements can be transferred to a PC by connecting the display unit to the PC's USB connection. When connected the display unit appears as a mass storage device in your PC. Files are then easily transferred to a folder in the PC.
|
 |
Components 
Fixturlaser GO Display Unit
Display unit with housing material of high impact ABS plastic. It has the dimensions 205 x 116 x 56 mm and weighs 0,7 kg with batteries.
Measuring Units
Housing material of anodized aluminum and high PC/ABS plastic over molded with TPE rubber. Measurement distance is up to 10 m (33 feet). The measuring units have a detector length of 30 mm (1,2 in).
Shaft Bracket
Shaft bracket made of anodized aluminum with a width of 20 mm. It allows for measurements with a shaft diameter of 20 - 175 mm (standard chain), with extension chain up to 450 mm.
|
