|
Fixturlaser XA with applications Product information (PDF, 894 Kbs)
A machine train (power train or multiple drive units) is three or more units with rotating shafts connected to each other. Aligning a machine train can be a cumbersome task with a large risk for making time consuming errors. In many cases, one or more of the machines are affected by thermal growth, and to obtain a precision alignment you need to compensate for that. Using the Fixturlaser XA expansion kit for machine trains, you can perform an express alignment of machine trains.
The Fixturlaser Machine TrainXA application software with the Fixturlaser XA system, will provide you with:
Express start up and measurement - with compensation for thermal offset
• Possible to insert the whole machine configuration in advance. Can be saved
for future measurements.
• Insert name or machine ID for each machine.
• Insert target values to compensate for dynamic effects.
• The Express mode can be used when measuring.
Express result - with a total overview
- 3D Flash® animations guide you, and show you what has been done so far, and what you need to do next.
- The result screen shows both horizontal and vertical view.
- The color guiding informs if machines are in or out of tolerance.
- The “Minimal moves function” automatically chooses the best reference machine, which is illustrated on the screen. Reference machine can also be selected manually.
- Full result, horizontally and vertically, is shown directly.
|
