|
The fastest and safest way of aligning a rotating machine is by using a laser-based alignment system. Efficient service technicians use the Fixturlaser XA in these simple stages to perform their work as quickly as possible.
Express mounting
The fixtures are pre-mounted in the case and the measuring units are quickly adjusted using the snap-on fixtures. You can choose wireless data transfer as an option if you wish to avoid cables.
Express adjustment
Extra large CCD-detectors eliminate the need to adjust the lasers.
Express rough alignment
The extra large detectors minimize the need for rough alignment. Not even large angular errors or long measurement distances are a problem due to CCD-technology.
Express measurement
The Fixturlaser XA registers the measurement points automatically. Animation in the form of red and green fields on the color screen show exactly how much you need to rotate the shaft before the next measurement is automatically registered.
Express results
All measurement results are shown directly on the color screen with large distinct figures. Information about the exact position of the machine and the applicable correction values are complemented with color codes to highlight any required corrections.
Express alignment
You will quickly hit the large detector surface, even with large angular errors. Arrows on the display show the direction and by how much the machine must be realigned.
Express documentation
You can create and download fast, flexible documentation by using the system’s USB ports and a USB memory.
Express removal
The pre-mounted fixtures make removal and packing of the Fixturlaser XA quick, which also eliminate the risk of loosing parts.
Express service technician
With the Fixturlaser XA, the job is done quickly and the service technician is ready for the next assignment.
Read more about the technology used in Fixturlaser XA here.
|
